BVXSW - 4029 CARTRIDGE BLACK

  • MSDS: BVXSW
  • Manufacturer: NER DATA PRODUCTS INC
  • Product Name: 4029 CARTRIDGE BLACK
  • National Stock Number: 6850-00N054562
Product Identification

Product ID:4029 CARTRIDGE BLACK
MSDS Date:04/20/1993
FSC:6850
NIIN:00N054562
MSDS Number: BVXSW

Responsible Party
NER DATA PRODUCTS INC
307 S DELSEA DR
GLASSBORO, NJ 08028
US

Emergency Phone: 609-881-5524

Info Phone: 609-881-5524

Cage: 8J225

Contractor
NER DATA PRODUCTS INC
GLASSBORO, NJ 08028 US

Telephone: 609-881-5524

Cage: 8J225

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


STYRENE ACRYLIC RESIN; (STYRENE BUTYLACRYLATE COPOLYMER)

CAS: 26655-10-7

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS W/EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE & FLUSH
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. SKIN:WASH W/SOAP & WATER. INGEST:DRINK
SEVERAL G LASSES OF WATER. CALL MD.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:WATER, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:TONER IS A COMBUSTIBLE POWDER. WHEN
DISPERSED IN AIR, IT FORMS EXPLOSIVE MIXTURE.

Accidental Release

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER & PLACE IN FIBER
CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT W/OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE REQUIRED WHEN USED AS INTENDED IN COPIER
OR PRINTER EQUIPMENT.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE REQUIRED WHEN USED AS (SUPP DATA)
Eye Protection:NONE REQUIRED WHEN USED AS (SUPP DATA)
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED IN
COPIER OR PRINTER EQUIPMENT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FL PT METH:16 CFR 1500.44 TEST METHOD. PROT GLOVES:INTENDED IN COPIER
OR PRINTER EQUIPMENT. EYE PROT:INTENDED IN COPIER OR PRINTER
EQUIPMENT.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.4-1.5(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINELY DIVIDED BLACK POWDER; SLIGHT PLASTIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH OTHER ORGANIC MATERIAL,
DECOMPOSITION WILL PRODUCE CARBON DIOXIDE & CARBON MONOXIDE.

Disposal

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.